Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Homestead, FL | TruePane Windows & Doors
We’re TruePane Windows & Doors, and we provide independent CGI window and door service throughout Homestead, Florida. The quick answer: we repair and replace CGI Sierra, Vista, Classic, and Estate product lines, and we stock OEM-compatible parts locally so most calls don’t drag into a second week. What makes our CGI work different here is simple – we’ve been fixing the same post-Andrew CGI units across this city for over a decade, and we know which failure modes show up on which streets. Call (448) 428-7290 for a free estimate.
Why Homestead Residents Choose Us for CGI Service
Dale Kessler grew up in Naranja, a few miles north of downtown Homestead, and he spent enough summers boarding up windows before hurricane season to decide he’d rather install ones that didn’t need it. That’s the short version of why TruePane exists. We’re an independent CGI service provider – not manufacturer-affiliated, not authorized – but our field experience with CGI sales & service runs deep, especially on the aluminum frames, sashes, and hardware installed across Homestead’s post-Andrew housing stock.
Our technicians work on CGI windows and doors daily across this city, including the specific product lines installed during the 1993-1998 rebuild. General contractors may know the broad strokes of impact products, but we know the torque specs, the gasket compression points, and the corrosion patterns that show up on a CGI Vista slider three miles from Biscayne Bay. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves your driveway, durations stated. If it’s not in writing, it’s not a promise – it’s a sales pitch.
Common CGI Windows & Doors Problems We Solve in Homestead
Here’s what we see most often when a Homestead homeowner calls us about CGI equipment:
- Failed sealant and gasket compression on CGI Sierra casement windows. After 25-plus years, the compression gaskets on Sierra casements lose their memory. You’ll notice air whistling through the sash during Homestead’s summer downpours, or water staining the interior sill. We replace the gasketing and reseal the frame using Miami-Dade HVHZ flashing details.
- Corrosion at aluminum frame corners and hardware on CGI Vista sliders. Salt-laden air from Biscayne Bay works on aluminum faster here than inland South Florida cities. We regularly see Vista sliding windows in Homestead with pitted frame corners and seized locks by year 20. We clean or replace the hardware, re-treat the aluminum, and re-lube the track with a marine-grade compound.
- Sagging of heavy impact-glass sashes in CGI Estate sliding doors. Impact-rated glass is heavy. On Estate sliders that have been operated daily for two decades, the rollers wear unevenly and the sash begins to drag, scoring the track. We adjust or replace the roller assemblies and true the sash so it travels square.
- Original CGI post-Andrew units failing modern Miami-Dade inspections. This is the one that catches homeowners off guard. Contractors here regularly find that homeowners with ‘hurricane windows’ from the mid-1990s Andrew rebuild assume they’re still compliant – but those original NOA-listed units often predate current large-missile impact standards and no longer meet today’s Miami-Dade code. We’ll tell you straight whether repair is worth it or whether a full-frame replacement is the honest call.
- Water intrusion around CGI Classic French doors. The threshold seals and door sweeps on Classic French doors take a beating from Homestead’s afternoon thunderstorms. We replace the compression seals and adjust the strike plates so the active leaf closes tight against the astragal.
CGI Service in Homestead: What Local Conditions Mean for Your Equipment
Homestead is one of the few U.S. cities where a single event – Hurricane Andrew in 1992 – reset nearly the entire residential window and door inventory. The resulting 1993-1998 rebuild means thousands of homes now have aging CGI units from that exact window, and those units are now 25 to 30 years old. Seals are failing, frames are corroding, and the original Miami-Dade County Notice of Acceptance listings often don’t align with today’s large-missile impact standards for the High Velocity Hurricane Zone.
Our crew worked on a 1996 concrete-block home off Campbell Drive in the Keys Gate neighborhood, where the owner had CGI Vista single-hung windows with corroded sash locks and blown seals. We replaced the failed IGUs and locking hardware with OEM-compatible parts, then re-caulked the exterior per Miami-Dade HVHZ flashing details, restoring smooth operation and eliminating visible condensation. That job is a good example of what Homestead’s post-Andrew stock requires: masonry anchoring, buck-frame integration, and installation methods approved for the HVHZ – not the techniques common in wood-frame markets to the north. Every installation here must carry a Miami-Dade NOA. We treat that as the starting point, not a sales point.
CGI Models & Products We Service in Homestead
We service the full CGI residential lineup you’re likely to find in Homestead homes: Sierra impact casement and fixed windows, Vista impact single-hung and sliding windows, Classic impact French doors, and Estate impact sliding glass doors. Our parts approach is straightforward. For critical components – impact-rated glass, sash balances, multipoint lock assemblies – we prioritize OEM CGI parts to preserve the unit’s original Miami-Dade NOA compliance. For non-impact hardware and weatherstripping, we use high-quality aftermarket parts that match or exceed OEM specs. And when a frame’s corrosion or seal failure makes repair uneconomical, we tell you that too, and we quote the replacement side by side in writing.
CGI Service Pricing in Homestead
CGI service pricing in Homestead depends on what failed. We quote every job upfront in writing, with no surprise line items on the bill.
- Service call and diagnosis: $89, applied toward the repair if you approve the work.
- Hardware replacement (locks, sash balances, rollers): $140-$320 per window or door, parts included.
- IGU replacement (blown seal, visible condensation): $250-$600 per sash, depending on size and impact rating.
- Full-frame replacement (Sierra, Vista, Estate, Classic lines): $950-$2,800 per opening, labor and permitting included.
What drives the cost is the extent of corrosion, whether we’re preserving an existing NOA listing or pulling a new permit, and whether the failure is hardware-only or glass. A free estimate from TruePane includes a written line-item quote, our recommendation on repair versus replace, and both warranty layers registered in writing before we leave. Call (448) 428-7290 to schedule yours. We’ll be there when we say.
Serving Homestead, FL - Our Local Coverage Area
We’re based in the Homestead area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Homestead
Because the Miami-Dade NOA standards for large-missile impact have been updated since the mid-1990s. The original CGI units installed during the 1993-1998 rebuild met the code of their time. Today’s High Velocity Hurricane Zone requirements are stricter, and an inspector is obligated to enforce today’s code, not the code your windows were built under. Call (448) 428-7290 and we’ll inspect your openings and tell you what a compliant repair or replacement looks like – estimates are free.
On a Sierra casement window that’s 20-plus years old, that’s almost always either a worn crank gear or a sash that has shifted in its frame from thermal movement and salt-air corrosion at the hinge points. We inspect the operator, clean or replace the gearing, and re-align the sash so it seats square. In Homestead’s concrete block homes, the buck frame and masonry anchoring also play a role – we check those while we’re there.
No. Homestead sits in the Miami-Dade High Velocity Hurricane Zone, and any window or door replacement that changes the product approval of an opening requires a permit and a Miami-Dade NOA-listed product. We pull the permits, schedule the inspections, and register both warranty layers before the truck leaves your driveway. Call (448) 428-7290 to get the process started with a free estimate.
Repair means replacing the insulated glass unit with an OEM-compatible impact-rated IGU that preserves the door’s original NOA listing, assuming the frame and track are sound. Replacement means a full-frame changeout, which is needed when the frame has corrosion, the track is warped, or the door no longer meets today’s large-missile standards. We’ll quote both options side by side in writing so you can see the numbers before you decide. Call (448) 428-7290 for that quote.
In Homestead’s salt-laden air and direct sun, we typically see seal failure on CGI units starting around the 18-to-25-year mark, with coastal and canal-adjacent homes trending earlier. Regular maintenance – cleaning track channels, lubricating hardware, checking exterior sealant – extends the service life. Your windows are on a clock, and the post-Andrew stock in this city is sitting right at the alarm going off. Call (448) 428-7290 if you’re seeing condensation between panes or feeling drafts – we’ll assess it for free.
Service Areas Near Homestead
TruePane serves Homestead and the surrounding South Miami-Dade communities, including Florida City, Homestead Base, Naranja, and North Key Largo. If you’re in the Upper Keys, see our CGI service in Key Largo page. Across the county line, we cover CGI service in Florida City as well. And for the full picture of where we work, here’s the Homestead service area page.
Book Your CGI Service in Homestead Today
If your CGI windows or doors are showing their age – fogged glass, stiff cranks, corroded frames – call TruePane at (448) 428-7290. A live person answers the phone 24 hours a day, 7 days a week. We’ll schedule your free estimate, quote you a written line-item price, and if the job is a repair, we’ll handle it and be gone – done right, with both warranty layers registered before we leave. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Homestead since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.