Custom & Geometric Windows in Homestead - Free In-Home Measure, Written Price

Trusted Custom & Geometric Windows for Homestead Homeowners

Custom and geometric windows in Homestead typically run $900 to $3,400 per opening installed, depending on the shape, glass package, and framing. We’ve been setting these windows across Homestead since 2008, and Dale Kessler has spent years in the glass trade learning which shapes hold up to Florida sun and which ones fail inside five years. If you have an arched, octagonal, or oversized opening that stock windows won’t fit, call (448) 428-7290 and we’ll come measure it properly.

Call (448) 428-7290

What you get with TruePane Windows & Doors is a window built to the exact radius and rough opening of your home, not a standard unit forced into a shape it was never meant to hold. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and the Done Right Promise means any issue with the install gets corrected without paperwork fights. That’s the deal, and we put it in writing.

What Our Custom & Geometric Windows Service Includes

Every custom window job starts with the opening, not the window. We measure every rough opening twice, check the framing for square, and only then do we order or build the unit. That order of operations is why our windows fit the first time and why you won’t see trim gaps filled with caulk. Here’s what we handle:

Custom Impact Windows

Custom impact windows are engineered to the exact dimensions of your opening while meeting Miami-Dade County product approval standards for wind and debris protection. In Homestead, where building code requires impact-rated products on new construction and most remodels, a shaped opening can’t be fitted with an off-the-shelf impact unit. We build and install impact windows in arches, triangles, circles, and oversized rectangles, each with the same lamination and frame reinforcement as a standard impact window, so your insurance and code requirements stay intact.

Geometric & Shaped Windows

Geometric windows are any non-rectangular unit: triangles, trapezoids, pentagons, octagons, circles, half-circles, and ellipses. These shapes are common in Homestead homes built in the 1980s and 1990s, especially in entryways, gable ends, and stairwells where builders used shaped glass as a design feature. When those original units start fogging or the frames rot, you can’t just buy a replacement at a supply house. We template each shape precisely and have the glass fabricated to the exact angle and radius, so the new window drops into the old opening without reframing.

Arched & Curved Windows

Arched windows, including full-radius and half-radius tops, are one of the most common custom requests we handle in Homestead. A true arch has a continuous curve, and if the radius is even an eighth of an inch off, daylight shows through the top of the frame. We cut templates on site, order glass bent or cut to the exact curve, and set the unit so the reveal is consistent all the way around. For homeowners with existing arch-topped windows, we can often replace the sash and glass while leaving the original frame intact, which saves money and preserves the home’s character.

Oversized Openings

Oversized openings are anything beyond standard stock sizes: picture windows wider than six feet, two-story feature windows, or any unit where the glass area exceeds what a typical manufacturer produces for shelf stock. These windows put real stress on the frame, the glazing, and the rough opening, and in Homestead’s wind zone that stress matters. We engineer oversized units with the right structural reinforcement, often using thicker glass or laminated panes to handle wind load, and we set them at a depth that keeps water where it belongs, which is outside your wall.

Brands We Service for Custom & Geometric Windows

We install custom and geometric units from manufacturers we trust to stand behind their product, including Andersen, Pella, Marvin, PGT, CGI, and ES Windows. Each of these lines has different capabilities for shaped glass, impact lamination, and frame materials, and part of our job is helping you choose the right one for the opening you have. We quote manufacturer lines side by side on paper, so you can see exactly what each option costs and what you’re getting for the money.

For shaped windows, we frequently work with ECO Window Systems and Mr-Glass because they fabricate true custom radii and angles without the long lead times some larger manufacturers impose. If you have an existing Therma-Tru or ViewLux unit that needs glass replacement or a frame repair, we can often source the parts and handle it. Whether you have one of these brands or something else entirely, call us and we’ll tell you honestly if it’s worth repairing or if replacement is the better road.

Signs You Need Custom & Geometric Windows Right Now

• Condensation or fogging between the panes. When the seal on an insulated glass unit fails, the argon or krypton gas escapes and moisture gets in. On a standard rectangular window that’s a straightforward replacement. On a shaped unit, it means custom fabrication, and the longer you wait the more likely the frame takes on water damage too.
• Visible daylight around the frame or sash. If you can see light through the gap around a shaped window, the unit has shifted or the original install was never right. In Homestead’s summer heat, that gap is also where air-conditioned air leaks out and humid air leaks in, and where wind-driven rain finds its way into the wall cavity.
• Difficulty opening or closing the window. Shaped windows are often fixed units, but operable arches and geometrics do exist. If one binds or won’t seat fully, the frame may be racked or the hardware is failing. We can tell you in one visit whether it’s a repair or a replacement, and we won’t sell you a replacement if a repair is the honest answer.
• Cracked or chipped glass in a shaped pane. A crack in a geometric window can’t be cut on a standard glass table. It takes a template and a fabrication order, and if that window is impact-rated or laminated, the replacement needs to match the original glazing package or it won’t perform the same in a storm.
• Rot or soft spots in the frame. Shaped windows are often installed in gable ends and under roof valleys where water runs. Once the frame starts to soften, the structural support for the glass is compromised. We pull the unit, repair or replace the buck framing, and reset the window so water drains away from the building instead of into it.

Our Custom & Geometric Windows Process - Step by Step

1. 1
   Measure and template the opening. We come out and measure every dimension twice, check the rough opening for square and level, and cut a physical template of the shape when it’s anything other than a standard rectangle. That template goes to the fabricator so the glass is cut to the actual opening, not to a drawing that may have been off since the house was framed.
2. 2
   Present options and a written quote. You get a line-item quote that shows the glass package, frame material, finish, and warranty terms for each manufacturer option. We don’t hide costs or add line items later, and we’ll tell you if the project needs a permit or if the existing opening is grandfathered in under current code.
3. 3
   Order the unit and schedule the install. Custom glass has a lead time, usually two to six weeks depending on the manufacturer and whether impact lamination is required. We coordinate the fabricator, the permit if needed, and the install date so the window arrives and goes in with as little disruption to your home as possible.
4. 4
   Install and seal the window. Our background-checked, uniformed technicians set the unit, shim it true, flash it properly, and seal all four sides. That last part matters more than most people realize: most window failures in Homestead aren’t glass, they’re water getting in around the frame because someone skipped the flashing or used the wrong sealant.
5. 5
   Register the warranties and walk the job with you. Before we leave, we register both manufacturer warranty layers in writing and hand you a copy with the durations stated. Then we do a final walkthrough so you can see the reveal lines, the interior finish, and the exterior seal. If the pane is not true, the job is not done, and we don’t leave until it’s right.

How Much Does Custom & Geometric Windows Cost in Homestead?

Custom & Geometric Windows Near Homestead - Our Service Area

We install custom and geometric windows throughout Homestead, Florida City, Princeton, Naranja, Goulds, and north into Cutler Bay, Richmond West, South Miami Heights, and West Perrine. If your home is in Homestead Base or near the air reserve base, we handle that area too. Most custom window jobs we complete in one visit once the fabricated unit is on hand, and we schedule the work when we tell you we’ll be there. For homes in Florida City or up toward Key Largo, the same crew and the same standard applies, no subcontractor hand-offs.

Frequently Asked Questions - Custom & Geometric Windows in Homestead

Schedule Your Custom & Geometric Windows Service in Homestead Today

If you have a shaped window that’s leaking, fogged, or just never fit right, call (448) 428-7290 and schedule a free estimate. We’ll measure, quote it in writing, and stand behind the work with the Done Right Promise and both warranty layers registered in your name. A real person answers the phone 24/7, and you’ll get a straight answer about your window, not a sales pitch. Call today and get it done right the first time.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Homestead since 2008.