Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Richmond Heights
Window replacement in Richmond Heights usually means one thing: converting original jalousie windows to modern impact-rated units that pass Miami-Dade’s High Velocity Hurricane Zone code. A full-frame conversion on a 1950s concrete-block home here typically runs $900-$1,800 per opening, depending on size and whether the rough opening needs sill correction. The work is not complicated for a crew that has done it hundreds of times, but it is exacting, and the inspection is unforgiving. If you are looking at windows that rattle in the frame or leak air every August, call (448) 428-7290 and we’ll send a technician to measure and price the job properly.
We’ve worked on Richmond Heights homes long enough to know the houses on Lincoln Boulevard from the ones off Caribbean Boulevard and 152nd Street. The concrete block, the shallow sills, the jalousie clips that seized up years ago, the way salt air moves in from Biscayne Bay and sits on aluminum. None of it surprises us anymore. That matters when you’re replacing windows in a house built before central air was standard and every opening was sized for louvered glass, not a sealed insulated unit. We measure twice, quote on paper, and register both warranty layers before our truck leaves your driveway.
Why TruePane Windows & Doors Is Richmond Heights’s Preferred Window Replacement Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler, and the company has carried a craft standard since 2008 through the trade tradition Dale learned from his father. Richmond Heights homeowners call us because we answer the phone with a live person, send background-checked uniformed technicians, and put every warranty registration in writing before we leave the job. That is The Keystone Standard. No paperwork fights. No arguing about what a warranty covers. If the pane is not true, the job is not done.
Our reputation in Richmond Heights rests on the Done Right Promise. If anything about the install is not right, we come back and make it right. No fine print, no call center, no regional dispatcher who has never seen a jalousie frame. Homeowners in the neighborhood around Howard Drive and the streets west of US-1 have called us after other contractors told them their original rough openings were “unworkable.” They usually are not unworkable. They just need sill pan flashing, slope correction, and a technician who knows what Miami-Dade’s water-infiltration test actually rejects.
We coordinate scheduling and dispatch from our Miami (South FL) office, and crews serve Richmond Heights locally. The difference shows up on install day: punctual, uniformed, prepared, and working in your home the way they would work in their own mother’s house.
Our Window Replacement Services in Richmond Heights
Full Frame Replacement
Full frame replacement in Richmond Heights is the standard fix for original jalousie openings, though we also install Sliding & Patio Doors - Richmond Heights homeowners request. We pull the old louvered frame entirely, correct the rough opening, flash it the way Miami-Dade requires, and set a new impact-rated unit. On a 1952 CBS ranch off Lincoln Boulevard, our crew found rough openings with no sill pan flashing and concrete sills pitched inward. That is what happens when the original builder counted on leaky louvered glass to shed water. We re-flashed every jamb with butyl tape, welded new aluminum sills to correct the slope, and set impact-rated casements before the inspector checked each NOA number against the permit. That is the job, done right.
Our Window Replacement team handles full frame work every week in Richmond Heights. Expect $900-$1,800 per opening for a typical 1950s block home, with the higher end covering custom sill pans, concrete profile correction, and interior casing work.
Insert Window Replacement
Insert replacement keeps your existing frame and sets a new window inside it. In Richmond Heights, this works in select situations: a newer opening that already has square, flashed framing and only the sash needs replacement. But the original jalousie jamb pockets on 1940s and 50s homes trap water behind the new sash, and Miami-Dade water-infiltration testing often rejects insert-style retrofits in those openings. We’ll tell you straight if an insert will pass inspection. If it will not, we quote the full frame conversion instead.
Storm Window Replacement
Storm window replacement in Richmond Heights means impact-rated glazing that carries a Miami-Dade Notice of Acceptance. This is not a cosmetic upgrade. It is the difference between a window that stays in the wall during a hurricane and one that becomes a projectile. PGT and CGI both build products tested for HVHZ uplift, missile impact, and cyclic wind pressure. We stock common sizes for Richmond Heights homes and order custom units when the rough opening is not square, which is often on houses built between 1947 and the mid-1960s.
Energy-Efficient Upgrade
Energy-Efficient Windows in Richmond Heights start with replacing jalousie glass. Original louvered windows let conditioned air pour out and salt-laden air pour in. A single-story block home with jalousies in nearly every room, including closets and utility areas, can have twenty or more individual openings. Each one we convert to a thermally broken, low-E, argon-filled unit cuts the air exchange and the electric bill. The year-round heat and humidity here shorten the life of any non-impact, non-thermally-broken product, so we quote units built for this climate, not a showroom in Ohio.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richmond Heights
We are an authorized installer for more than a dozen manufacturer lines, and for Richmond Heights homes we commonly quote PGT, CGI, and Ply Gem side by side on paper so you see exactly what you are buying. PGT and CGI dominate the impact-rated market in Miami-Dade because their NOA documentation is current and their products hold up to salt air. We stock common replacement parts for these brands locally, which means faster turnaround when a sash, balance, or weatherstrip needs service. A live person answers the phone 24/7, and most window replacement jobs in Richmond Heights are completed in a single visit.
Common Window Replacement Problems We See in Richmond Heights Homes
- Jalousie frames not anchored for HVHZ uplift. Original 1940s and 50s jalousie frames were screwed into the block with hardware never designed for hurricane wind loads. Miami-Dade’s structural wind-load inspection rejects a direct replacement unless the new frame is anchored per current code.
- Water trapped in old jalousie jamb pockets. The original jamb pockets collect rainwater and humidity, which rots interior trim and breeds mold behind the new sash. Inserts fail the water-infiltration test for this exact reason.
- Salt-air corrosion on bare aluminum clips. Biscayne Bay’s salt-laden air corrodes the uncoated aluminum clips that hold jalousie louvers in place. The pivots seize, the glass rattles out of plane, and eventually a louver falls out. Once the clips are gone, the window is not repairable, only replaceable.
- Concrete sills pitched inward. Many original Richmond Heights sills slope toward the house instead of away from it. Water that hits the glass runs down and into the wall cavity. Any full frame replacement must correct this slope or the new window leaks from day one.
Pricing for Window Replacement in Richmond Heights, FL
Here is what we see in Richmond Heights, based on actual jobs on 1947-1960s block homes. A standard full frame impact window conversion runs $900-$1,800 per opening, assuming the rough opening needs typical sill correction and flashing. A simple single-hung or fixed picture window in a square opening starts around $700. Custom sized casements or picture windows with welded sill work run toward the higher end. An Window Replacement in Richmond Heights job that includes twenty or more jalousie openings, which is common on this housing stock, will price out as a whole-house package, and we write every line item on paper before you sign. Call (448) 428-7290 for a free estimate. The quote is detailed, the price is fixed, and no line item changes once work starts unless you approve it in writing.
We Also Serve Cities Near Richmond Heights
Our crews cover the surrounding South Miami-Dade area, including Homestead, Florida City, Homestead Base, and Key Largo. If you live just outside Richmond Heights, call and ask. We’ll tell you straight if we can get a crew to you and when.
Serving Richmond Heights, FL - Our Local Coverage Area
We’re based in the Richmond Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Richmond Heights
Yes. Richmond Heights falls within Miami-Dade County’s High Velocity Hurricane Zone, and every window and door replacement must carry a Miami-Dade Notice of Acceptance. This is not a recommendation. It is code. The NOA is the product-approval document that certifies the specific window, in its specific frame, passed missile impact, cyclic wind pressure, and water infiltration testing. The inspector will check each NOA number against the permit before the job closes. If the window does not have an NOA, it does not pass. Call (448) 428-7290 and we’ll quote only NOA-approved products for your Richmond Heights home.
No. The original jalousie frames in Richmond Heights homes are not anchored to meet HVHZ uplift requirements, and the louvered frame itself does not carry an NOA. Impact glass set into an old jalousie frame still leaves you with a frame that can pull out of the wall in hurricane winds. The fix is full frame replacement with an anchored, NOA-approved impact window. Skimping here fails inspection and leaves you with a false sense of protection.
Because the 1940s and 50s floor plans in Richmond Heights were ventilation-dependent. A single home may have jalousie windows in nearly every room, including closets and utility areas. A 1,500-square-foot Richmond Heights house can have eighteen to twenty-two individual openings, while a same-size post-AC house in Kendall might have ten. Each jalousie opening is a separate unit with its own NOA documentation and its own framing work. The count is not padding. It is the house.
Opening the wall around a jalousie window in Richmond Heights routinely triggers three code items: anchorage to current HVHZ uplift requirements, water-resistive barrier continuity behind the new flashing, and corrected sill slope to shed water away from the wall. If the original electrical ran through the jamb pocket, the inspector may also require that wiring to be brought up to current code. We write allowances into every contract for these items, so when the wall comes open and the sill is pitched the wrong way or the flashing is missing, the fix is already priced and you approve it in writing before we proceed. No surprise line items. No change orders you never saw coming. Call (448) 428-7290 for an exact quote on your Richmond Heights home.
Yes, and usually within the first week. Original jalousie glass has no thermal break and no real seal, so conditioned air leaks out while heat and humidity come in. Impact-rated, low-E, argon-filled units cut that exchange dramatically. For elevated areas, we also offer Glass Railing Systems - Richmond Heights homeowners use to open views without sacrificing safety. The same laminated glass that stops hurricane debris also blocks a significant amount of noise from US-1 and Caribbean Boulevard traffic. Homeowners near Howard Drive tell us the difference is immediate, especially in bedrooms that face the street. Call (448) 428-7290 and we’ll quote energy-efficient impact windows built for South Florida climate.
If your Richmond Heights home still has original jalousie windows, you already know the drafts, the rattling, the corrosion, and the summer electric bill. The fix is straightforward: full frame impact conversion, done by a crew that understands Miami-Dade code and a company that stands behind the work in writing. TruePane Windows & Doors has been at this since 2008 through the trade tradition Dale Kessler built. The Done Right Promise covers every install. The Keystone Standard means both warranty layers are registered before our truck leaves your driveway. If the pane is not true, the job is not done. Call (448) 428-7290 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Richmond Heights and South Miami-Dade with the craft standard his father taught him: measure twice, flash once, and never leave a job until the pane sits true.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.