Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Roof Replacement & Installation in Homestead: What to Know First
We provide independent ES Windows roof replacement and installation in Homestead, with most standard roof replacement projects completed in two to four working days once materials arrive on site. ES Windows products are built for South Florida wind loads, and when a roof replacement touches the structural opening around skylights, roof windows, or second-story glazing, the work needs to be done to the letter of Florida Building Code. If you own ES Windows products and you’re facing a roof replacement that will affect their openings, call us at (448) 428-7290 for a straight answer and a written estimate.
Quick takeaways for ES Windows owners in Homestead:
- We’re an independent ES Windows service provider, not a factory-authorized dealer, which means we work for you, not a warranty quota.
- Roof replacement around existing ES Windows openings requires flashing, sealing, and re-setting that most roofing crews are not trained to do on glazed openings.
- Both manufacturer warranty layers get registered in writing before we leave the driveway, per our Keystone Standard.
- Most roof replacement jobs we walk are fully quoted within 48 hours of the site visit.
How ES Windows Products Fail - and How We Fix Them
ES Windows are generally well-built for the Homestead climate, but like any glazed product, they have failure modes that show up after years of sun, salt air, and storm cycles. Here’s what we see on roof replacement jobs in this part of Miami-Dade County, and how we handle each one.
- Flashing separation at the head of roof-level units: On ES Windows’ fixed and operable aluminum lines, the factory flashing is often installed by a roofer who was not a glazier, and the sealant joint at the head of the window separates within five to eight years. Water gets behind the flange and tracks down the interior of the wall. We remove the old flashing, inspect the rough opening for rot, and re-flash with properly lapped material before the new roof ties in.
- Thermal bow on large fixed panes: ES Windows’ larger picture windows and fixed transoms on south-facing Homestead elevations bow measurably in July and August. When a new roof goes on and the decking is replaced, the opening tolerances change by an eighth of an inch or more. Most crews caulk the gap and move on. We re-square the opening and re-set the frame so the pane sits true under summer heat load.
- Weep system clogging from roof debris: During any roof tear-off in Homestead, grit and old shingle fragments end up in the window weep holes at the sill, especially on ES Windows sliding and casement lines mounted below a valley. A clogged weep system traps water inside the frame and rots the sill packing from the inside out. We vacuum every weep channel after a roof job and replace the sill packing if it has begun to break down.
- Stress cracks from re-roofing vibration: Pneumatic nailers and demo hammers on a roof deck send vibration through the framing into any glazed unit below. ES Windows’ tempered units are tough, but older annealed units in interior rooms can crack at the corner when a nailer runs for eight hours straight above them. We inspect every ES Windows unit on the affected walls after a roof replacement and flag any corner cracks before they spread.
- Skylight and roof window curb failures: ES Windows roof windows and skylights sit on curbs that rot faster in Homestead’s humidity than anywhere else in the state. When a roof replacement exposes a rotten curb, a roofer will often re-flange over it and call it good. We remove the curb, reframe it, and re-install the ES Windows unit on a properly flashed, code-compliant curb that will not pull water into the ceiling in the next hurricane season.
What’s different about these failures on ES Windows compared to other brands is that the aluminum frame extrusions are narrower than PGT or CGI equivalents, so the sealing and flashing details are tighter. A roofer who treats an ES Windows curb like a PGT curb will leave the flashing proud of the frame line, and water will find it. We don’t let that happen.
Our ES Windows Roof Replacement & Installation Process
The work follows a fixed sequence, so nothing gets missed when roof work and glass work intersect.
- 1
Call and site visit: You call (448) 428-7290. We schedule a visit, and Dale Kessler or a senior technician walks the roof and every affected opening. We measure the ES Windows units, photograph the flashing condition, and document the rough opening dimensions.
- 2
Written estimate: You get a line-item quote on paper. It states the scope, the materials, the labor, and which parts are OEM ES Windows and which are quality aftermarket equivalents. No verbal estimates, no change orders later.
- 3
Parts decision: We sit with you and go through the parts list. If ES Windows OEM flashing or hardware has a long lead time, we show you the aftermarket option side by side, with prices, so you decide with full information.
- 4
The work: We re-set, re-flash, and re-seal every ES Windows opening the roof replacement touches. The crew is background-checked and uniformed. They treat the inside of your house the way they’d treat their own mother’s.
- 5
Water test and inspection: After the roof is tied in and the flashing is complete, we run a water test on every re-set opening and walk the interior for any sign of moisture tracking. No test, no sign-off.
- 6
Warranty registration and cleanup: Both manufacturer warranty layers are registered in writing before the truck leaves the driveway. The site is swept, the magnet run, and you get a copy of every registration in your hand.
What ES Windows Roof Replacement & Installation Costs in Homestead
Roof replacement on a Homestead home with ES Windows openings runs a broad range because every job is different, but here are the numbers we see most often on the finished invoices.
- Re-flashing and re-sealing ES Windows openings during a roof replacement: $85 to $180 per opening, depending on the size and condition of the existing flashing.
- Re-setting a single ES Windows fixed or operable unit that has shifted out of square: $250 to $600 per unit, including new sealant, shims, and fastener replacement.
- Roof window or skylight curb replacement with new flashing and re-installation of the existing ES Windows unit: $1,200 to $2,800 per curb, depending on curb size and roof pitch.
- Full replacement of an ES Windows roof window or skylight unit with a new unit and new curb: $2,800 to $6,500, depending on the model and glass package.
What moves the price is the condition of the rough opening once the old flashing comes off. If the framing is sound, the job stays in the low end. If the rotted sill packing or a failed curb has to be rebuilt, the labor goes up. Either way, you’ll see the number in writing before we start, and it will not change unless you change the scope.
Call (448) 428-7290 for an exact quote. Estimates are free, and they’re written, not spoken.
Why Homestead Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving Homestead and the surrounding communities for more than years through a craft heritage that started before TruePane was ever a company name. Dale Kessler grew up in Naranja and learned the trade at Miami Dade College’s Kendall Campus before spending years on residential and commercial glass across Miami-Dade County. That’s why when a Homestead homeowner with ES Windows has roof work coming, they call us first.
Every job is covered by the Done Right Promise. Both manufacturer warranty layers are registered in writing, with durations stated, before we leave the driveway. A live person answers the phone 24 hours a day, seven days a week. And if the ES Windows unit cannot be saved, we’re an authorized installer for PGT, CGI, CWS, ECO Window Systems, and more than a dozen other manufacturers, so you get honest options on paper, not a sales agenda.
We’ve been behind enough botched flashing and out-of-square frames in Homestead to know that the cheapest price on a roof replacement is rarely the cheapest roof. We do the work once, and we stand behind it.
FAQs
Yes. If the roof deck and shingles around the curb are sound, we can replace just the ES Windows roof window or skylight and its flashing without touching the rest of the roof. In Homestead’s humidity, the curb itself is often the failure point, so we inspect the curb framing before we quote the job. Call (448) 428-7290 and we’ll tell you what you’re dealing with.
In most cases, no. The limited warranty on ES Windows products covers the glass and frame, not the installation work around them. We register both manufacturer warranty layers in writing after our work is done and document the original opening condition so there’s a paper trail if a claim ever comes up. If the warranty has already lapsed, the Done Right Promise still covers our installation work in full.
Most ES Windows replacement hardware, flashing, and sill packing components are available to us within five to ten business days through our supply chain. Some custom or discontinued ES Windows parts can take longer, and in that case we’ll show you the aftermarket equivalent in writing before you commit. We don’t leave a roofless opening waiting on a backorder without telling you the timeline first.
If the roof is already being torn off and the ES Windows roof windows are more than 12 to 15 years old, replacement is usually the better financial call. You’re already paying for the labor to remove and re-install the unit, and the marginal cost of a new unit is often less than the cost of refurbishing a tired frame and glass package. We’ll put both numbers on paper and let you decide.
Yes, when the scope of work requires a permit under City of Homestead building code, we pull it, and the work is inspected before we call the job done. For smaller re-flashing and re-sealing projects that fall under repair scope, we’ll tell you honestly whether a permit is required. No surprises, no code shortcuts.
If you own ES Windows products and you have a roof replacement coming in Homestead, call (448) 428-7290. We’ll walk the job with you, put the numbers on paper, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Homestead and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.