CGI Window Replacement Nationwide | TruePane Windows & Doors

CGI Window Replacement in Homestead: What to Know First

CGI window replacement in Homestead typically runs between $850 and $2,400 per opening depending on the series, glass package, and whether the frame needs full replacement or an insert will do the job. We’re an independent CGI service provider, not a manufacturer arm, which means we quote real numbers and stand behind the work without pointing you back to a corporate help line. Most CGI replacements in Homestead take one day per opening once the glass is in hand.

Call (448) 428-7290

This page is written for homeowners in Homestead, FL who already own CGI windows and are dealing with fogged glass, failing hardware, a binding sash, or storm damage. If that’s you, call us at (448) 428-7290 and we’ll schedule a free estimate. A live person answers, day or night.

How CGI Products Fail - and How We Fix Them

• Fogged glass on CGI Estate and Targa series. South Florida humidity finds its way into any seal that’s given up, but we see it most on Estate and Targa units that were installed in the early 2000s when sealant chemistry wasn’t what it is now. The fix is a new insulated glass unit cut to the original frame spec, not a silicone bead smeared over a failed seal. We order the IGU with the same Low-E coating and argon fill the original carried, so the replacement doesn’t stand out from the neighbor pane.
• Binding sashes on CGI Magnum single-hung windows. In Homestead, the real culprit is usually frame deflection from settling slab foundations, not a bad balance. The sash starts dragging on the jamb liner, and the homeowner assumes the window’s shot. We shim and re-square the frame, replace the balance if it’s genuinely worn, and the window glides again without a full replacement. That’s a repair most manufacturers’ literature doesn’t address because it’s an installation-environment problem, not a product defect.
• Corroded roller assemblies on CGI sliding glass doors. Homestead sits close enough to the coast that salt air eats cheap steel rollers in five to seven years. The doors still look fine from the interior, but they groan and stick. We replace the rollers with stainless assemblies and re-align the track, which returns the door to one-hand operation. This one’s common enough that we keep three CGI-specific roller profiles in the truck.
• Water staining at the sill on CGI Picture Window installations. When we pull the trim on these, the issue is almost never the window itself. It’s a flashing detail that was skipped at the original install, usually a missing back dam or no sill pan. Homestead’s afternoon thunderstorms put water against the rough opening, and without proper flashing, it wicks into the drywall over time. We pull the window, flash the opening to the Florida Building Code, reset the unit, and the leak stops. The window was never the problem; the install was.
• Failed sealant joints around CGI impact windows. After a hurricane or a long decade of direct sun, the perimeter sealant on any impact window can develop hairline cracks that let air and water through. It’s a common call in neighborhoods like Redland and Naranja where landscaping has settled and shifted the grade. We cut out the old bead, clean the joint, and re-seal with a commercial-grade product rated for South Florida UV. If the sealant has failed on a second-story opening, we handle that too with proper ladder safety and two-man lifts.

Our CGI Window Replacement Process

1. 1
   Measure twice, quote on paper. Our technician comes to your Homestead home, measures every opening, checks the frame for square and plumb, and writes out a line-item quote. You see the CGI series we’re matching, the glass package, the hardware, and the labor as separate numbers.
2. 2
   OEM vs. aftermarket decision. If the job is under warranty, we use CGI OEM parts and document everything so the claim stays clean. If it’s out of warranty, we give you the choice: OEM for a perfect match, or a quality aftermarket equivalent that does the job for less. We’ll tell you which one we’d pick and why.
3. 3
   Glass and parts ordered to spec. We order the insulated glass unit or hardware with the correct dimensions, tint, Low-E coating, and gas fill. No substitutions without your sign-off in writing.
4. 4
   Removal and prep. On the scheduled day, we protect the work area, remove the old window or sash, and inspect the rough opening. Any rotted wood, termite damage, or bad flashing gets addressed before the new unit goes in.
5. 5
   Installation and sealing. The new window is set, shimmed, squared, and fastened per Florida Building Code. We flash the opening, seal the perimeter, and make sure the drainage plane is correct before trim goes back on.
6. 6
   Test, cleanup, and paperwork. We operate the window through its full range, check the locks, verify the seal, and walk you through the finished work. Our techs don’t leave until the job site is swept and the old glass is loaded on the truck. Warranty registration paperwork is in your hand before we leave the driveway.

What CGI Window Replacement Costs in Homestead

Here’s what we’re quoting on CGI work right now in the Homestead market:

• Insulated glass replacement (fogged seal): $425-$850 per sash, labor included
• Hardware replacement (balancers, rollers, locks): $180-$420 per opening, depending on the part
• Insert window replacement (existing frame is sound): $850-$1,600 per window
• Full-frame replacement (new construction or rotted jamb): $1,500-$2,400 per opening

Full-frame work runs higher because we’re building the opening back to code before the window ever goes in. The price moves based on window size, glass package, and whether the rough opening needs repair. We don’t surprise you with change orders. The quote we write is the price you pay. Call (448) 428-7290 to schedule your free estimate.

Why Homestead Homeowners Call TruePane Windows & Doors for CGI Work

We’ve been serving Homestead and the surrounding communities since 2008. Dale Kessler grew up in Naranja and spent enough summers boarding up windows before hurricane season to decide he’d rather install ones that didn’t need it. We’re not a franchise that parachutes in when a storm clears.

Every CGI replacement we do is backed by the Done Right Promise: if the window isn’t installed right, we make it right, no paperwork fights and no arguing. And The Keystone Standard means both manufacturer warranty layers are registered in writing before our truck leaves your driveway. We also service other major brands, including Andersen, Pella, and PGT. If your CGI windows are a lost cause and another line makes more sense, we’ll quote those side by side too. Call (448) 428-7290.

FAQs