Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Window Installation in Homestead: What to Know First
PGT window installation in Homestead typically runs $450 to $1,600 per opening depending on the series, size, and whether we’re doing a full replacement or a sash-and-frame repair. TruePane completes most single-window PGT installs in one visit, usually three to five hours on site. We’re an independent PGT service provider, not a factory branch, which means we tell you plainly when a window is worth saving and when replacement is the honest call. This page is for Homestead homeowners who own PGT products and want an installer who knows how these windows fail in South Florida’s salt air and hurricane seasons. Call (448) 428-7290 for a free estimate that puts the numbers on paper.
How PGT Products Fail - and How We Fix Them
PGT builds a solid window, but forty-plus years of working glass in Miami-Dade has shown us exactly where they give out under Homestead conditions. Here’s what we see on PGT jobs, line by line:
- WinGuard aluminum frames losing sealant at the sill corners. The WinGuard line is everywhere in Homestead, and its weep holes are smaller than most. After ten or fifteen summers of afternoon thunderstorms, silt and salt crust block those channels. Water pools inside the track, and the homeowner notices damp drywall below the window before they see any glass problem. We pull the sash, clean the track, re-seal the corners with a marine-grade sealant, and test with a hose before we call it done.
- Spectrum vinyl sashes binding in July. Vinyl expands in South Florida heat, and the Spectrum series runs tight at the meeting rail. A window that opens fine in February sticks hard by August. The fix is not forcing the crank; it’s adjusting the hinge geometry and sometimes replacing worn slide blocks with the correct PGT-spec part. We’ve corrected dozens of these on Homestead homes without ever replacing the frame.
- Roller assemblies flattening on PGT sliding windows. PGT sliding windows, especially the heavier impact-rated units with laminated glass, wear steel rollers against aluminum tracks until they grind. Homeowners call thinking the window needs full replacement. Most of the time it needs two new roller assemblies and a track clean. We use OEM rollers when they’re available and a quality aftermarket equivalent when PGT has discontinued the part, which happens more often than owners expect.
- Fogged glass on older PGT insulated units. Homestead’s humidity eventually finds the seal on any double-pane unit, and PGT’s older WinGuard models from the early 2000s are at that age. When the seal fails, the glass fogs from the inside and no cleaning fixes it. We source replacement insulated glass units, or IGUs, sized to the original PGT frame, and on many models we can replace glass without tearing out the whole window.
- Fastener corrosion from coastal air. Homes within a mile or two of Biscayne Bay get a salt film on everything. PGT’s frames hold up, but the fasteners that anchor them to the buck pass through a galvanic reaction and rust. We see this most on fixed and picture windows that were installed twenty years ago with non-stainless hardware. We replace with stainless and re-anchor to code, which matters when the next storm warning hits.
Our PGT Window Installation Process
Every PGT job goes through the same sequence, from the first phone call to the final walkthrough. No shortcuts, no surprises on the bill.
- 1
We answer the phone and listen. A real person takes your call day or night, asks what the window is doing, and schedules a time that works. You’re not leaving a message for a call center.
- 2
We measure and diagnose on site. Our tech measures every opening twice, checks the existing PGT frame and flashing, and identifies whether this is a repair, a sash replacement, or a full unit replacement. We write the options side by side on paper.
- 3
We quote upfront, before any work starts. You get line-item pricing with no vague allowances. If a part needs to be ordered, you know the cost and the timeline before we leave.
- 4
We install to Florida Building Code, not to habit. PGT impact windows require specific fastener schedules and anchoring. Dale Kessler grew up boarding windows in Naranja before hurricane season; he’d rather install glass that doesn’t need it, and the crew installs to the letter of code because that’s the standard, not a selling point.
- 5
We register both warranty layers in writing. Before the truck leaves your driveway, manufacturer warranty paperwork is registered and durations are stated on your invoice. If it’s not in writing, it’s not a promise - it’s a sales pitch.
- 6
We clean up and walk the job with you. You see the installed window, we test it in front of you, and we leave the area cleaner than we found it. If something’s not right within 90 days, we make it right. No paperwork fights.
What PGT Window Installation Costs in Homestead
PGT window installation pricing depends on the series, size, and whether you’re replacing glass, a sash, or the entire unit. Here’s what we quote on most Homestead jobs:
| Job | Typical Range |
|---|---|
| IGU glass replacement in existing PGT frame | $280 - $650 per window |
| Sash or hardware repair (rollers, balances, hinges) | $120 - $380 per window |
| Full PGT window replacement, standard size | $750 - $1,600 per opening |
| Full PGT impact window replacement, large or custom | $1,500 - $3,200 per opening |
What moves the price: window size, whether the existing frame is square and sound, access (second story costs more), and whether laminate impact glass is involved. We give you a fixed quote before work begins, and that number does not change unless you change the scope. Call (448) 428-7290 for an exact figure on your windows. Estimates are free.
Why Homestead Homeowners Call TruePane Windows & Doors for PGT Work
We’ve served Homestead and the surrounding communities since 2008 through a heritage of craft and community commitment. Our technicians are background-checked and uniformed, and they measure every PGT opening twice before touching glass. When a PGT part is discontinued or backordered, we can pivot to comparable lines from Andersen, Pella, or CGI and quote them side by side on paper, so you see exactly what you’re buying. Every job is covered by our Done Right Promise, which means if it’s not done right, we make it right. No fine print, no arguing. That’s the Keystone Standard, and it’s been the standard since Dale Kessler put the first TruePane truck on the road.
Frequently Asked Questions
Glass replacement by a third party does not automatically void a PGT warranty, but the work must meet the original installation specifications and use compatible components. When we replace an IGU in a PGT frame, we match the glass spec and sealant system to the original build, and we document the work so you have a record if a future claim comes up.
Most single-window PGT installations are completed in a single visit, usually three to five hours on site. If a specific PGT part needs to be ordered, we tell you the timeline before we start the job. Call (448) 428-7290 and we’ll give you a straight answer for your specific windows.
Often, yes. A binding vinyl sash, a failed roller assembly, a fogged IGU, or corroded fasteners can be fixed without replacing the entire window. We’ll tell you honestly which repairs will last and which ones are throwing good money after bad. The estimate is free either way.
For full window replacements that involve a change to the building envelope, Homestead requires a permit. We pull the permit, schedule the inspection, and make sure the installation passes the first time. For glass-only and hardware repairs, a permit is typically not required, and we’ll tell you which applies to your job before we start.
WinGuard is the impact-rated aluminum line, built for hurricane zones and heavier than standard windows. Spectrum is the vinyl line, lighter and more budget-friendly, but not all Spectrum models carry impact ratings. If your home is in a wind-borne debris zone, which includes much of Homestead, you need impact-rated glass to meet code. We’ll check your specific location and tell you what’s required.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Homestead and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.