Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPicture & Fixed Windows in Homestead, FL | TruePane Windows & Doors
Picture and fixed windows give Homestead homeowners exactly what they want: a wide, unbroken view of the yard, the sky, or the street without a frame line cutting through the middle. These are non-operable panels, which means they don’t open; they’re built to hold laminated impact glass in place during a storm and stay sealed the rest of the year. If you’re designing a new home, replacing old single-pane windows, or putting glass into a gable or stairwell, this is the profile you keep coming back to. We install them across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, always sized and set for Homestead’s High-Velocity Hurricane Zone. Call (448) 428-7290 when you’re ready to talk through sizes and options.
Product Overview - Picture & Fixed Windows
A picture window is the simplest window in a house, but in South Florida it carries the heaviest engineering load. Because the sash doesn’t move, the entire assembly has to absorb wind pressure and impact without any help from operable hardware. That’s why the impact-rated version of this product is built around non-operable laminated impact glass panels set into reinforced aluminum or vinyl frames. The glass stays in the frame under impact, and the frame stays anchored to the opening. In Homestead, where wind zone and exposure category drive the permit conversation, this is not a decorative decision; it’s a structural one.
Architecturally, picture windows do most of the work in the rooms people remember. A fixed panel centered on the living room wall, a row of fixed glass across the back of a family room, a tall fixed unit above the front door. Because they don’t open, they’re often paired with operable units on either side, a casement or horizontal roller on each flank doing the ventilation while the fixed center holds the view. That combination shows up constantly in Homestead ranch homes and newer two-story builds. It reads clean from the curb and works hard during the nine months of the year when the windows stay shut and the AC runs.
Frame choice matters here. Aluminum gives you the slimmest sightlines and the longest spans, which is why most of the wide fixed panels we install in Homestead are aluminum. Vinyl brings a softer look and strong thermal performance at a friendlier price point, and it holds up well in coastal air. Both materials are available with the laminated glass packages that satisfy Miami-Dade and Florida Building Code HVHZ requirements.
Technical Specifications
- Frame materials: Aluminum and vinyl, selected per opening size and architectural style.
- Maximum width: Up to 120 inches wide, depending on glass package and design pressure requirements for the opening.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, and clear glass.
- Finish options: White, almond, bronze, black, and tan.
- Operation: Fixed, non-operable; commonly flanked by operable windows for cross-ventilation.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration, matched to your specific quote.
- Design pressure: Design pressures matched to your wind zone, up to +/-100, never higher.
What’s notable about this product line is the width capability. A 120-inch fixed panel changes the entire feel of a room, and not every window company in Homestead will attempt that span. We will, but only after the wind-load math for your specific opening is done, because a fixed panel that wide has to be specified honestly.
Hurricane & Compliance Performance
Laminated Impact Glass
The heart of this product is laminated impact glass with a PVB (polyvinyl butyral) interlayer. When a projectile hits, the glass may crack, but the interlayer holds the shattered pieces in place, keeping the building envelope sealed. That’s the entire point of an impact window in Homestead: the opening stays closed, wind stays out, and the roof doesn’t get pressurized from the inside.
Miami-Dade NOA / Florida Product Approval
Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers are issued per configuration, not per product family generically. That means the exact size, glass package, and frame combination on your quote has its own approval documentation. We verify the right numbers against your specific configuration before any permit package goes to the building department in Homestead.
FBC / HVHZ Compliance
These windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements, which govern most of Miami-Dade County, including Homestead. HVHZ is not a marketing label; it’s the reason the approval paperwork on a Homestead job is thicker than the same job in Orlando.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These aren’t optional benchmarks for a fixed window in Homestead; they’re the tests the product must pass before the NOA gets issued.
Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. You don’t need a +/-100 window in a protected pocket of Homestead, and we won’t sell you one. You need the rating your specific site requires, and we calculate that before the quote, not after the install.
Energy Performance
Low-E and insulated glass options are available for homes where heat gain through south- and west-facing fixed glass is a real concern. Homestead sun is relentless in August, and a Low-E insulated unit in a fixed panel cuts solar heat gain significantly compared to clear single-pane glass. The right glass package depends on orientation, shade, and how much of the day the window takes direct sun.
Color & Glass Options
White and almond finishes dominate the existing inventory in Homestead, and for good reason; they keep a clean line on most South Florida homes without fighting the roof tile or the stucco. Bronze and black have gained ground in the last decade, especially on modern and transitional builds where a dark frame reads intentional against light walls. Tan works well on homes with earth-tone exteriors and barrel-tile roofs, which Homestead has in abundance.
On the glass side, the decision usually comes down to how much sun the opening takes. Clear laminated impact glass preserves the truest color and the brightest view, and it’s the default for north-facing or heavily shaded openings. Tinted glass knocks down glare and heat gain in rooms where the afternoon exposure is aggressive. Low-E insulated glass does the heavy lifting on energy performance and is the right call for large fixed panels on south and west elevations. We’ll walk you through the orientation math on the free measurement visit.
Installation by TruePane Windows & Doors in Homestead
An impact-rated fixed window is only as good as the installation around it. The NOA and Florida Product Approval paperwork assumes a specific anchoring and sealing method. Cut corners on the install and you have an approved product performing like an unapproved one. That’s the part of this conversation that gets the least attention and matters the most in Homestead.
We start with a pre-install inspection of the opening: framing condition, moisture history, and the anchoring surface the new window will tie into. Then the unit gets set level, plumb, and square. A fixed window that’s set 1/8 inch out of square will fight the glass and shorten the seal life; we don’t let that happen.
The perimeter gets sealed with AAMA 812 low-expansion foam, which fills the void without bowing the frame. Our installation practice follows AAMA 2400/2410 standards for the full process, from flashing to anchoring to finishing. After the window is in, we run a water test on the opening and clean up the site before we leave. For Homestead specifically, we’re familiar with the building department’s expectations on HVHZ permit submittals, including the product approval documentation your specific configuration requires. Coastal exposure near the eastern edge of the city changes the anchoring conversation, and we account for that in the bid.
Frequently Asked Questions - Picture & Fixed Windows
Design pressures are matched to your specific wind zone, up to +/-100, never higher. The correct rating for your Homestead property depends on the site’s wind zone, exposure category, and the size of the opening. We calculate that during the estimate visit and specify the window to the requirement, not to a generic maximum. Call (448) 428-7290 to schedule a measurement and get the exact rating for your openings.
Lead time depends on the manufacturer line, frame material, glass package, and the configuration’s approval status with Miami-Dade and the state of Florida. Standard configurations move faster than custom sizes or uncommon glass combinations. We’ll give you a written production timeline with your quote so you know what to expect before signing. For a precise lead time on your specific configuration, call (448) 428-7290.
Yes. In an HVHZ jurisdiction like Homestead, the building department will require product approval documentation for the exact configuration you’re installing. We include the NOA and Florida Product Approval numbers for your specific window configuration in the permit package. This is standard practice on every job we do in Homestead; it’s not an add-on and it’s not optional.
Yes, within the constraints of the approved configurations for the frame and glass package you select. Fixed windows are the most flexible profile for custom sizing because there’s no operable sash to re-tool. Widths up to 120 inches are achievable, subject to wind-load calculations for the opening. If you want a size or configuration that falls outside an approved combination, we’ll tell you before you pay for anything. Call (448) 428-7290 to discuss your opening.
Fixed windows are the lowest-maintenance profile in the house. Wash the glass with mild soap and water, keep the weep holes on the exterior clear of debris, and inspect the perimeter sealant once a year. In Homestead, salt air near the coast makes that annual sealant check more important than it is inland. We’re happy to take a look during any future service visit.
Get a Quote - Picture & Fixed Windows in Homestead
If you’re planning fixed windows for a new build or a replacement project in Homestead, start with a free on-site measurement. We’ll size the openings, run the wind-load numbers for your specific site, and put a written quote in your hand that includes the approval documentation for your configuration. Call TruePane Windows & Doors at (448) 428-7290 to schedule your appointment.
Written by the team at TruePane Windows & Doors, serving Homestead, FL and the surrounding Miami-Dade County area.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
