Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Roof Replacement & Installation in Homestead: What to Know First
We provide independent ECO Window Systems roof replacement and installation across Homestead, including full tear-offs, underlayment replacement, and flashing work around existing ECO skylights and roof-mounted window systems. Most Homestead jobs are completed in two to four days depending on roof pitch and square footage, and we quote every project with a fixed line-item price before the first shingle comes off. Call (448) 428-7290 for a free estimate and written scope of work from Dale Kessler and the TruePane crew.
This page is written for Homestead homeowners who own ECO Window Systems products integrated into their roofline, skylights, dormers, or sunroom glazing and need the roof itself replaced or installed without compromising those systems. As an independent ECO Window Systems service provider, we are not affiliated with the manufacturer, but we work on their products weekly and understand how roof work interacts with ECO framing, flashing, and seal integrity.
How ECO Window Systems Products Fail - and How We Fix Them
Roof replacement around ECO Window Systems components fails most often at the transition points, where roofing meets glazing. These are the five failure patterns we see regularly across Homestead:
- Flashing separation at the ECO Series 900 roof curb. The Series 900 curb-mounted skylight uses a mill-finish aluminum curb that expands and contracts differently than the asphalt shingle around it. After eight to ten Homestead summers, the sealant bond between curb and underlayment breaks down, and water tracks under the shingle. We strip the old flashing, install new step flashing with a 4-inch minimum overlap, and re-bed the curb in a polyurethane sealant rated for South Florida UV exposure.
- Condensation between glazing layers on the ECO Classic roof window. The Classic line’s insulated glass unit sits in a wood frame that absorbs humidity through minor frame checking. Once the desiccant inside the spacer bar saturates, the window fogs permanently. We replace the IGU with a new unit matched to the original Low-E coating spec and re-seal the frame with a marine-grade wood sealer before reinstallation, so the replacement doesn’t fail the same way in three years.
- Roof deck rot under the ECO SunSeries fixed skylight. The SunSeries uses a low-profile frame that depends entirely on the integrity of the surrounding decking. When the factory-installed protective membrane gets nicked during original construction, water sits against the OSB, and by the time the homeowner sees a ceiling stain, the deck is soft. We cut out the rot, sister new decking to the rafters, install a full ice-and-water shield course, and set the SunSeries back with new compression gaskets.
- Wind-driven water entry at the ECO Ventana operable roof window. The Ventana’s hinge side is its weak point in Homestead’s afternoon thunderstorm winds, which regularly exceed 40 mph. The factory weatherstrip compresses over time and allows driven rain past the sash seal. We replace the weatherstrip set, adjust the sash to sit square in the frame, and verify the drainage channel is clear of the dirt and leaf debris Homestead oaks deposit every spring.
- Thermal stress cracks in ECO glass units over south-facing roofs. Homestead’s July sun hits south-facing glazing with brutal intensity. The ECO SolarCool line’s tinted outer lite absorbs more heat than clear glass, and when a section is shaded by a roof cricket or dormer while the rest is in full sun, the temperature differential cracks the glass. We source direct replacement units and check the shading pattern. If the cricket is causing the stress, we’ll tell you, because a new pane in the same conditions will crack again.
Our ECO Window Systems Roof Replacement & Installation Process
Every ECO job follows the same sequence, whether it’s a full roof replacement around existing skylights or new roof installation with ECO products specified from the start.
- 1
The call and the site walk. A live person answers at (448) 428-7290. We schedule a site visit in Homestead, inspect every roof-to-glazing transition, and document the current condition with photos the homeowner keeps.
- 2
The written scope. Dale Kessler reviews the findings. You get a line-item quote on paper listing materials, labor, disposal, and permit costs. If it’s not in writing, it’s not a promise, it’s a sales pitch.
- 3
Protection and tear-off. We protect existing ECO glazing with plywood shields before any shingle removal starts, so a dropped tool doesn’t cost you a new skylight.
- 4
Decking and underlayment. We inspect decking under and around every ECO unit, replace what’s compromised, and lay full ice-and-water shield at all penetrations before shingles go down.
- 5
Flashing and re-bedding. Each ECO curb, frame, and dormer transition gets new step flashing, fresh sealant, and a water test with a hose before finish roofing covers the work.
- 6
Final inspection and the Done Right Promise. We walk the roof with you, show you the finished transitions, and put the warranty terms in writing. If something isn’t right, we make it right. No paperwork fights.
What ECO Window Systems Roof Replacement & Installation Costs in Homestead
Roof replacement and installation costs in Homestead vary by square footage, pitch, and how many ECO units are involved. Here are the ranges we quote most often:
- Full roof replacement around one ECO skylight, 1,500 sq ft home: $9,800-$14,500
- Full roof replacement around two or three ECO units, 2,200 sq ft home: $14,200-$19,800
- ECO skylight re-flashing and curb rebuild only (no full roof): $850-$1,400 per unit
- Roof deck repair around a failed ECO unit (rot removal, sistering, membrane): $1,200-$2,600 depending on extent
- New roof installation with ECO units specified from scratch: $12,500-$21,000 depending on roof complexity and skylight count
What moves the price is decking condition, roof pitch, and whether the existing ECO flashing is salvageable. Steep roofs take longer and cost more in labor. Rotted decking always adds material cost. Call (448) 428-7290 for an exact quote. Estimates are free, and the number you see on paper is the number you pay.
Why Homestead Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’ve been doing this work in Homestead for over a decade under Dale Kessler’s name, and the rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done. Our techs are background-checked and uniformed, and they measure every opening twice before ordering parts. Every ECO job carries the Done Right Promise and The Keystone Standard, which means both warranty layers are registered in writing before the truck leaves your driveway. And if the day comes when you need to replace an ECO unit with something else, we quote PGT, CGI, CWS, and ES Windows side by side on paper so you see exactly what you’re buying. We answer the phone 24/7 with a live person, not a voicemail tree. That’s a square deal, and we stand behind it.
FAQs
In most cases, no, provided the roof work around ECO units is done to the manufacturer’s flashing and sealant specifications and the glazing itself isn’t altered. The ECO warranty typically covers the glass and frame, not the surrounding roof, but improper flashing installation can void the install-related coverage if a leak is traced to the transition. We handle every ECO transition with the same care as the original installation and document the work in writing so you have a record if a claim ever comes up. Call (448) 428-7290 and we’ll walk through your specific warranty terms.
Yes. We source direct-match IGUs for the ECO Classic, SunSeries, SolarCool, Ventana, and Series 900 lines, including the Low-E and tint specifications from the original unit. For discontinued ECO lines where factory glass is no longer available, we use a quality aftermarket IGU built to the same thickness and coating spec. The fit is verified before installation, and the workmanship is covered by the Done Right Promise. Call (448) 428-7290 for a quote on your specific unit.
Most full roof replacements around ECO units take two to four days, depending on roof size, pitch, and how many skylights or roof windows are involved. We protect the ECO glazing during tear-off and schedule the work so your home is weather-tight at the end of each day. Re-flashing a single ECO unit without a full roof replacement is usually a one-day job. Call (448) 428-7290 to schedule a site walk and get a firm timeline in writing.
If your ECO skylight is more than 15 years old and the roof is coming off anyway, replacing it at the same time costs less than doing it separately later, because the roof deck is already open and the flashing is already being reworked. If the unit is still dry and the glass is clear, there’s no reason to replace it. We’ll tell you honestly which applies when we inspect it. Call (448) 428-7290 and we’ll look at it together before you decide.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Homestead and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.