Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Shingle, Tile & Metal Roofing in Homestead: What to Know First
ES Windows shingle, tile and metal roofing issues in Homestead come down to one hard truth: the window is only as dry as the flashing and sealant around it. We fix the full waterproofing connection between ES Windows frames and South Florida roofing systems, and most repairs are done in a single visit. Pricing is honest and line-itemed before any work starts because a square deal means you know the number before we touch the opening.
This page is for homeowners in Homestead who own ES Windows and have water, sealant or frame issues where the window meets the roof. If that sounds like your house, call (448) 428-7290 and a live person answers. We are an independent ES Windows service provider, not a manufacturer arm, which means we work for you, not the factory warranty department.
How ES Windows Products Fail - and How We Fix Them
We see the same failure patterns repeat across Homestead neighborhoods. Here are the ones that show up most often on ES Windows installations, with the fix we apply.
- Frame-to-roof sealant breakdown on ES Windows aluminum line. The original sealant between the window frame and tile or shingle roofing shrinks and cracks under Florida sun within five to eight years. Water gets behind the frame and travels down the wall before you ever see a stain. We remove the failed bead, clean the joint, and re-seal with a urethane rated for South Florida temperature swings, not a silicone from a box store.
- Improper flashing at the head of the window under shingle courses. Homestead homes with shingle roofs often have window head flashing that was tacked on, not lapped correctly under the shingle above. Rain driven by a summer squall runs behind the flashing and into the frame. We remove the shingle course, install a proper L-metal head flashing, and re-lay the shingles so the water sheds over, not into, the opening.
- Tile roof-to-window kickout flashing missing on ES Windows patio and fixed-glass units. Barrel tile roofs concentrate water at corners, and without a kickout diverter at the window’s upper corner, that water pours directly behind the frame. ES Windows fixed-glass and patio-door units on the back of Homestead homes take the worst of it. We cut in a metal kickout, seal it to the frame, and the wall stays dry in a hurricane.
- Metal roof expansion pulling the sealant joint apart. Metal roofs move. A lot. When the roof expands and contracts through a Homestead summer, a rigid sealant joint against an ES Windows frame will tear within a couple of years. We use a flexible, high-movement sealant at metal-to-window transitions and mechanically fasten a trim cap so the sealant isn’t doing structural work.
- Condensation on the interior glass, mistaken for a roof leak. We get calls from Homestead owners sure their roof is leaking into the bedroom, only to find the ES Windows unit has a failed thermal seal. The water is condensation, not roof water. We replace the insulated glass unit and, while we’re there, check the exterior sealant joint so the homeowner doesn’t pay for a roof repair they never needed.
Our ES Windows Shingle, Tile & Metal Roofing Process
We don’t guess, and we don’t send a helper out to “take a look.” Every ES Windows roofing job follows the same steps.
- 1
You call (448) 428-7290. A live person answers, takes your address and what you’re seeing, and schedules a window that works for you. No callback form.
- 2
We inspect the window and the roofing connection. The technician walks the roof, checks the head flashing, the side joints, the sill, and the sealant line on every ES Windows unit you flagged. We write findings down where you can see them.
- 3
We quote the fix on paper. You get a line-item price for the work, with OEM or equivalent parts named. We talk through OEM versus aftermarket where it matters, so you’re deciding with real information, not a sales pitch.
- 4
We do the work the day we said we would. Flashing, sealant, glass replacement, whatever the opening needs. The crew is background-checked, uniformed, and they treat the inside of your house like it’s their mother’s.
- 5
We test every repair before we leave. If it’s a seal, we check it with a moisture meter. If it’s flashing, we run the hose on the joint for several minutes. If the repair doesn’t prove itself dry, it’s not done.
- 6
You get the guarantee in writing. The Done Right Promise applies to the workmanship. If it’s not right, we make it right. No paperwork fight, no arguing.
What ES Windows Shingle, Tile & Metal Roofing Costs in Homestead
Here are honest ranges for the ES Windows roofing work we do most often in Homestead. These are real numbers from jobs we’ve completed, not a national average from a data farm.
| Service | Typical Range in Homestead |
|---|---|
| Re-seal one ES Windows frame-to-roof joint (tile or shingle) | $185-$425 |
| Head flashing replacement under shingle course, one window | $350-$700 |
| Kickout flashing install at a tile roof corner | $225-$475 |
| Metal roof expansion joint re-seal with trim cap, per window | $300-$650 |
| Insulated glass unit replacement on an ES Windows unit | $450-$1,100 depending on size and glass package |
What moves the price is access (second story), how far the old sealant has to be chased out, and whether the existing flashing is reusable or scrap. You’ll know the exact number before work begins. Call (448) 428-7290 to schedule a free estimate, and we’ll quote the job in writing.
Why Homestead Homeowners Call TruePane Windows & Doors for ES Windows Work
Dale Kessler grew up in Naranja, a few miles north of downtown Homestead, and spent enough summers boarding up windows before hurricane season to decide he’d rather install ones that didn’t need it. He learned the trade at Miami Dade College’s Kendall Campus and has run TruePane out of Homestead for more than a decade. The founding rule is simple: if the pane is not true, the job is not done.
That’s the standard on every ES Windows job we take. We register both warranty layers in writing before the truck leaves the driveway, and the Done Right Promise means we stand behind the work in a way you can hold in your hand. We’re also authorized installers for PGT, CGI, CWS, and ECO Window Systems, so if your ES Windows unit is past saving, we can quote a replacement from a line that fits Homestead building code, side by side on paper. Call (448) 428-7290 and a live person answers, any hour, any day.
FAQs
Your ES Windows warranty covers the window itself. The roofing connection, flashing, and sealant around it are typically the original installer’s responsibility, which is exactly where most leaks start. We document every repair with photos and a written description, so if you ever need to file a claim, you have the paperwork a homeowner is usually left without. Call (448) 428-7290 and we’ll walk you through what your warranty actually covers.
Most single-window sealant and flashing repairs are done in one visit, and after a storm event we prioritize active leaks. We don’t promise a specific dispatch time because every house is different, but we’ll tell you directly when we’ll be there and we’ll be there when we say. Call (448) 428-7290 and a live person answers to get you on the schedule.
When glass is being replaced, we source ES Windows-compatible insulated glass units that match the original build, and we use OEM hardware wherever it’s available. For sealant and flashing materials, OEM doesn’t apply; the manufacturer doesn’t make those components. We use commercial-grade materials rated for South Florida’s heat, UV and salt exposure. The parts decision is always on the written quote, so you know what you’re paying for.
If the glass is still clear, the frame is square, and the only issue is water getting in at the roof joint, repair is almost always the right call. We tell a Homestead homeowner to replace a window when the frame itself is corroded, the glass seal has failed, or the unit no longer meets Miami-Dade impact code and you’re about to spend money on a repair that buys you two years. Call (448) 428-7290 and we’ll give you a straight answer, even if it means less work for us.
We write the guarantee down before we start. If it’s not in writing, it’s not a promise, it’s a sales pitch. The Done Right Promise is a written workmanship guarantee, and both manufacturer warranty layers are registered in writing before the truck leaves your driveway. We’ve stood behind that in Homestead for over a decade, and the company founder has been doing this work since before impact windows were a code requirement here. Call (448) 428-7290 for a free estimate and put us up against any other written quote you’re holding.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Homestead and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.